#Win500 p25 trunk tables how to
#Win500 p25 trunk tables upgrade
#Win500 p25 trunk tables software
#Win500 p25 trunk tables download

#Win500 p25 trunk tables download

Using the 'Preferred' options under the Library Import tab of the EZScan software, choose the system and select for download all of the desired Sites and Talkgroups(TGRPs) for the preferred coverage area.

Start with a blank Virtual Scanner (V-Folder), define the desired coverage area (for example, Central Ohio), and name the Virtual Scanner as such.

Example: This method applies to any multi-site trunked system, but we'll use Ohio MARCS-IP in Central Ohio as an example.

This will allow scanning of multiple separate sites, especially for the larger incorporated towns, cities and counties that we want our scanners to cover. Desired talkgroups must be entered for each site which is entered as a separate system, but can be combined into the same scan lists (for example, Anytown Fire, Anytown Police, and Anytown Service). The solution is to program each Site for a given System as a separate (totally different) System so they will be scanned separately. In many areas this causes a great deal of radio traffic on other nearby tower sites to be missed. However, the Object Oriented Scanners only scan multi-site systems using the Roam method once an acceptable site is located the scanner stays on that site and only looks for another site if reception is lost.

Off - Stops at the very first decodable CC and does not move to another.

Roam - Scans all CCs being received, selects & stays on the best decodable site, and only re-scans if reception is lost or falls below data decode threshold.

Stationary - Scans all CCs being received and thus all sites.

Issue with multi-site trunked system monitoringД®arlier Whistler models such as the WS1040/WS1065 and their Radio Shack/GRE variants, offer multiple modes for scanning multi-site trunked systems with multiple different Control Channels(CC):

Never released publicly, subsequently became WS1095.

#Win500 p25 trunk tables upgrade

ALL THE SAME after UPGRADE except silk screening.Once, returned, continued forward support is possible via Whistler Repair and EZ-Scan Software, with all the newer additions and features of a WS1080. Ability to be Upgraded for DMR (and add P25 Phase II to Pro-18) decode with a Paid Upgrade with User paid shipment to Whistler, returned by them.

#Win500 p25 trunk tables software

Capable of NXDN decoding, with a free Upgrade to the latest Firmware via Whistler's EZ-Scan software.

Capable of DMR decoding, with a free Upgrade to the latest Firmware via Whistler's EZ-Scan software.

Project 25(P25) Phase I and II decoding.

Released around the time the PSR-800 was, but lacking additional/advanced features SEE #5.

The following discussion applies to these scanners

#Win500 p25 trunk tables how to

In this article we will try to give you a practical approach on how to best accomplish this. Subsequently, questions have arisen as to whether or not ANY table needs to be used in a Project 25 Standard system since the impression is that the data stream carries all of the instructions necessary for the scanner to follow comms.Multi-Site programming is a solution to the issue of some Object Oriented Scanners not scanning multiple Sites in a single Scanlist. Particularly, is the Step entry required? Subsequently, questions have arisen as to whether or not ANY table needs to be used in a Project 25 Standard system since the impression is that the data stream carries all of the instructions necessary for the scanner to follow comms. Making only that change eliminated the issues.

I had the user manually insert the table exactly as shown, and now that user is cheerfully up and running. Looking at the Database for the system the user wanted to listen to I found a 'Custom Trunking Table.' Using WIN500, I did a test import of that P25 system and the image below shows the trunking table that came as part of the import. Obviously, the scanner became confused trying to resolve conflicting instructions from the software and the data stream from the system so it didn't do anything. Come to find out it was a 'Project 25 Standard' system but in changing things around in the programming of this user's scanner, the rebanded MOT 800 II trunking tables were accidentally entered in this system. I was helping a user in another forum that was having trouble scanning a favorite system. I was kinda undecided about which RR Forum Heading to place this thread under, but it isn't really a software issue, so this forum was the next best choice.